Practical application of thermal oil hose and steam hose

 

In modern industry, whether it is chemical, petroleum, pharmaceutical, or food processing, the transportation of thermal oil and steam is particularly important. As key transmission equipment, thermal oil hose and steam hose can ensure the efficiency and safety of the production process. This article will give you a detailed introduction to the characteristics of thermal oil hose and steam hose, purchase guide and its advantages in practical applications.

 

1. Basic introduction of thermal oil hose and steam hose

 

Thermal oil hose and steam hose are made of a variety of materials such as high-strength synthetic rubber, steel wire braided layer and external protective layer. These materials are not only resistant to high temperature and high pressure, but also have excellent anti-corrosion properties, suitable for use in harsh industrial environments.

 

1. Thermal oil hose: mainly used to transmit high-temperature thermal oil. The inner layer is made of high-temperature resistant special rubber to ensure that it will not soften or deform under high temperature conditions, and the outer layer is covered with an anti-aging rubber layer to resist environmental erosion and wear. The steel wire braided layer in the middle provides extremely high mechanical strength and can withstand greater pressure.

 

2. Steam hose: mainly used to transmit high-temperature steam. Steam hoses are usually made of high-temperature resistant composite rubber, which can withstand high temperatures and pressures, and have good elasticity and long service life.

 

2. Purchase guide for thermal oil hoses and steam hoses

 

When choosing thermal oil hoses and steam hoses, you should pay attention to the following key factors:

 

1. High temperature resistance: Pay special attention to its high temperature resistance range when choosing. Thermal oil hoses usually need to withstand high temperatures of 150℃ to 300℃, while the high temperature resistance range of steam hoses is approximately between 150℃ and 200℃.

 

2. Pressure resistance: During the transmission of thermal oil and steam, there is usually high pressure, so the pressure resistance of the hose must also meet the requirements. It is recommended to choose products with excellent pressure resistance to ensure safe and stable operation.

 

3. Material quality: High-quality hoses should be made of imported or high-quality raw materials, such as special high-temperature resistant rubber and stainless steel or galvanized steel wire braid.

 

4. Inner diameter and joint specifications: According to the actual equipment and needs, select hoses with appropriate inner diameter and joint specifications to ensure the tightness of the connection and the efficiency of transmission.

 

5. Corrosion resistance: There are often corrosive media in industrial environments, so corrosion resistance is also an important consideration when choosing thermal oil hoses and steam hoses.

 

3. Practical application of thermal oil hoses and steam hoses

 

In actual industrial applications, thermal oil hoses and steam hoses play an important role, affecting production efficiency and equipment life. The following are their specific applications in different fields:

 

1. Chemical industry: In chemical production, various high-temperature liquids and gases are often required to be transmitted. Thermal oil hoses can be used to transfer high-temperature thermal oil to heat reactors or other equipment, while steam hoses can be used to transport steam to provide the necessary heat source.

 

2. Petroleum industry: In the process of petroleum processing, thermal oil hoses and steam hoses are widely used in heating, dehydration and other process links that require high temperature and high pressure. In this high-pressure and highly corrosive environment, the performance of these hoses is particularly critical to ensure the efficiency and safety of the production process.

 

3. Pharmaceutical industry: In pharmaceutical production, temperature control has a great impact on the quality of drugs. With their excellent high-temperature resistance, thermal oil hoses and steam hoses can accurately control the temperature of equipment, thereby ensuring the production quality of drugs.

 

4. Food processing industry: In the process of food processing, high-temperature sterilization, steaming and other operations are often required. Thermal oil hoses and steam hoses have become important heat transfer tools, through which they maintain the efficient operation of equipment while ensuring the hygiene and safety standards of food.

 

5. Building materials industry: Thermal oil hoses and steam hoses are widely used in high-temperature processes in building materials processing. For example, in the production of cement and steel, steam hoses can provide a stable heat source for the heating furnace, while thermal oil hoses are used for internal heat transfer of equipment.

 

IV. Precautions for use and maintenance

 

In order to ensure the safe and efficient operation of thermal oil hoses and steam hoses in practical applications, proper use and maintenance are essential. Here are some suggestions and precautions:

 

1. Inspection before installation: Before use, carefully check the hose and joints to ensure that there are no damage, cracks or other defects. Test the joints for tightness to prevent oil and steam leakage.

 

2. Avoid severe bending: When used correctly, avoid severe bending of the hose to prevent cracks or breakage. Large radius bending should be used as much as possible to extend the service life of the hose.

 

3. Regular cleaning: After long-term use, impurities may accumulate inside the hose, affecting the transmission efficiency. Regular cleaning helps to keep the pipeline unobstructed and ensure transmission efficiency.

 

4. Regular inspection: It is recommended to conduct a comprehensive inspection every six months or every year, including pressure testing, corrosion testing, etc. Deal with problems in a timely manner to prevent safety accidents.

 

5. Storage conditions: Unused hoses should be stored in a dry, light-proof environment to avoid contact with corrosive substances such as acids and alkalis to prevent aging and performance degradation.

 

V. Conclusion

 

The application of thermal oil hoses and steam hoses in modern industry is undoubtedly indispensable. They not only greatly improve production efficiency, but also provide important guarantees for the safety of industrial production. Purchasing high-quality thermal oil hoses and steam hoses, through scientific installation and maintenance, can effectively extend the service life of the equipment and ensure the smooth progress of the production process. Therefore, in the future industrial development, thermal oil hoses and steam hoses will continue to play their important role and promote industrial production towards a more efficient and intelligent direction.